55L Internal mixer

1.The main purpose of the equipment and the conditions of use

1.1Main use of the equipment: This machine is mainly used for plasticizing and mixing of natural rubber, synthetic rubber, reclaimed rubber and plastics.

1.1Conditions of use of the equipment

A.Use environment: altitude <1000m, temperature 5℃-40℃, relative humidity up to 95%

B.Power supply voltage: three-phase, AC380V±10%, 50Hz±0.5Hz

C.Cooling water pressure: 0.2-0.4Mpa

Cooling water temperature: <25℃±3℃

Cooling water consumption: ~12T/h  

D.Compressed air pressure: 0.5-0.8Mpa

2.The main technical parameters

Kneading effective capacity: 55 L

Total capacity of mixing chamber: 125 L

Feeding method: Rear projection

temperature control system: water cooling

Temperature accuracy (error between table temperature and actual material temperature): ±5 ℃

Main motor power: AC75 kw

Rated speed:  980r/min

Rotor speed (front/rear): 30/24.5 r/min

Mixing chamber tilt angle: 120°

The pressure of the top bolt on the material: 0.06-0.6Mpa

Cooling water pressure: 0.3-0.4 Mpa

Heating steam pressure (plastic refining): 0.5-0.8 Mpa

Dimensions (LxWxH): about 3280*1930*3070mm

Weight (excluding electric control box, oil, water): about 7500kg